Recommended Software for Arena Management

When there is a little over a month left to enter the data for a thousand plus cattle penning teams into a fickle spread sheet software program that was built by good intentioned volunteers; the last thing anyone should be doing is looking for replacement software. However, as any event/entry secretary or producer knows this is sometimes the lifeline that is needed to get the job done.

The preparation of all of the necessary data combined with balancing a three-quarter of a million dollar show in the six weeks prior to its start should have been enough to do. Throwing in a new piece of software to learn and master would be considered ludicrous to say the least. The producers deemed it to be a necessity in view of the history of inconsistencies in the program currently in use.

With a three-year old recommendation in hand and very little back ground checking, Arena Management Software became the chosen lifeline. The software was purchased, loaded onto the computers, played with for a day or so and then our team went to work. The KCI support group was there, day and night, to help with the learning curve and any snags that presented themselves. Our team quickly realized that the new user-friendly software program we had taken a chance on was going to be our ongoing choice for future events. The show was a success. The producers and contestants were happy. All was good in our world!

There have been a lot of years pass by since those short six weeks when our group became acquainted with the Arena Management Software. The program still provides a user-friendly format that has the talent to produce minimal data to realms of reports. From rodeo to cattle penning events the product continues to amaze our team with its ability to perform in and out of the arena.

Posted in general | Comments Off on Recommended Software for Arena Management

Top 4 Benefits of Demand Planning Software

In today’s dynamically changing business environment, organizations have to be agile and quick in responding to market changes and internal factors to minimize losses and leverage opportunities. Demand Planning Software is essential to gauge customer demand and market changes in real time and pass on the information to the supply chain. It creates the perfect balance between market demand and supply. However, these are not the only benefits that a demand planning software offers. It has many other benefits and some of them are listed here.

It Helps in Accurate Revenue Forecasting: A good demand planning software help in accurate revenue forecasting by correctly analyzing the market demand and forecast results based on that. Without proper information and software to process that information, organizations bring products by guessing the customer’s demand. Some even take sub-par data that has not been properly processed to reach conclusions. Being a result of guesswork, this information or data does not always deliver favorable results. This software helps in analyzing data properly and then forecasting the revenue accordingly.

It Assists in Aligning Inventory Levels: When there is a huge demand in the market, a business can lose out on the opportunity of fulfilling it on its own if it not prepared with the right inventory. By knowing about the possible future rise or fall in the demand for a product, they can align the inventory levels to make sure that they reap the benefits and their customers are satisfied.

It Enhances the Profitability for a Product: If there is low demand for a product, a company may or may not decide to carry on with it. However, if it is bound to bring bigger profit margins despite low sales, it is worth investing time and money in. Using the Demand Planning Software, businesses can find out how to enhance the profitability of a product.

It Allows for Re-planning Based on Given Data: It is important to keep an eye on the market during the production and marketing lifecycle of a product. And the simple reason behind it is the need to re-plan or alter strategies to get maximum attention and beat the competition. By looking at the changes, decision makers can make amendments to the approach as well as the strategy to meet their business goals.

Their cloud platform mPower supports various aspects of businesses such as demand planning, retail planning, business integration management, supply chain planning, etc. The platform’s design allows business to do smart resource management and make intelligent business decisions.

Posted in general | Comments Off on Top 4 Benefits of Demand Planning Software

How to Fix an Error Accessing the System Registry Easily

The system registry is an important component to practically every computer, and it would actually be considered a pile of electronics if the system registry was not included. It is essential for computers based on Windows, since it is the storage location for the hardware, software, and pretty much everything that makes the computer run.

Changes and updates go directly through the system registry for storage, but sometimes things do not always go as smoothly as we wish. Not many know what to do about an error accessing the system registry, but it must be fixed in order to keep your computer running.

An error accessing the system registry is not very uncommon, and it usually occurs when old files or updates are still located within the registry. The error can occur when new updates are downloaded, new programs installed, or even when new software is being added to your computer. A window will usually pop up stating “error accessing the system registry” and not much can be done until the error is fixed.

It can result from old updates being left in the system, or even old files that were not deleted when a download or installation was incomplete. The best way to get rid of the error accessing the system registry is to find out the problem, get rid of old files, and start fresh with new updates and software to keep your computer running smooth.

Because the error accessing the system registry can occur for a number of different reasons, it can sometimes be hard to locate the specific problem. The first step is to determine what exactly triggered the error, such as a new download, new software being installed, or updates occurring to current software on the computer.

The error is most common when updates occur or when updated software is installed, since most likely older versions are still being kept within the registry. In this case, the error accessing the system registry can be easily correct. First off, the installation or update needs to be stopped. Then the system registry can be accessed by the computer owner, and software can be purchased or downloaded to fix this problem.

One of the best options for getting rid of an error accessing the system registry is a registry fix program, since it goes in and does all of the work for you. Rather than trying to find the damaged files and delete them yourself, the program knows exactly what to look for and get rid of for the error to go away.

Not only will a registry fix help to get rid of the problem occurring now, it can even help to get rid of any files and old updates that may cause problems in the future. It is beneficial for clearing your computer of any unnecessary files or programs that may be causing it to run slow, and can even prevent an error accessing the system registry in the future.

A registry fix program can either be downloaded online or purchased at an electronics store, and is a great way to fix an error accessing the system registry. It does all of the work for you, and can even improve the overall performance of your computer. It can get rid of old files, partial updates, or even programs that are no longer needed, and is perfect for fixing your error accessing the system registry.

Posted in general | Comments Off on How to Fix an Error Accessing the System Registry Easily

How to Resolve “Memory Card Error” From Canon IXUS 130

Canon IXUS 130 is a sophisticated digital camera that has a resolution of 14.1 megapixels. The camera is inbuilt with almost all advanced features, including fully wide-angle 4x zoom lens and motion blur technology. The IXUS camera is compatible with SDHC (Secure Digital High Capacity) and SDXC (Secure Digital Extreme Capacity) cards, with storage capacity as high as 2TB.

Since the storage memory of the cards is huge, data loss from these cards is simultaneously huge. One of the main reasons for data loss from cards is corruption of these cards. In most cases, you receive an error message after your card gets corrupted. However, an updated backup allows you to overcome card corruption. It allows you to restore data. But in case of unavailability of backup, you can use recovery software to recover data from a corrupted card.

As a practical case, you view the below error message on Canon IXUS 130 while attempting to view some previously stored photos on your SDHC card:

“Memory Card Error”

Every single photo saved in the memory card becomes inaccessible after the above error message appears. In addition, no more photo can be saved on card. In short, the card can not be read or written upon.

Cause:

The above error message that makes all the photos inaccessible is primarily caused due to corruption of card. Few reasons that are accountable for the above error message are virus infection, interrupted read/write operation, and human errors.

Resolution:

The resolution for the above error message is formatting of memory card in the camera itself. The process deletes all the previously saved data and allows you to save new data. While formatting proves a good resolution for users who do not require the old data, it becomes fatal for users, like photographers, detective agents, etc, who save critical data in their memory card. However, recovering formatted data now-a-days is an easy process. To do so, you need to use an advanced third-party Photo Recovery Software. A Image Recovery tool is readily available on the Internet by just one single click.

Posted in general | Comments Off on How to Resolve “Memory Card Error” From Canon IXUS 130

Advantages and Disadvantages of Biometric Time and Attendance Software

First of all let me ask you what you understand by time and attendance software? Have you ever been asked to log in as soon as you enter office and the main gate of the office has a Biometric machine that takes in your finger prints and allows you to enter the office premise? Yes, these are the time and attendance software being installed in a company.

Biometrics consists of methods for uniquely identifying a person (human being) by his/her physical or behavioral traits. There are many biometric software available in market for such purpose and their use is widely known. One such use is Biometric time and attendance management software.

Those days are gone when we had to punch in cards or sign into a register to tell the other person that we are present. Just as paper checking has been changed from manual to computerized, identifying a person and letting him in your office has been changed from manual to biometrics.

There are many benefits of having such methodology in your office. Such as:

• Accurate timing: When a person looks at his watch and enters the time there is a slight chance that he may see the wrong timing and write. Whereas with biometric time and attendance software there is no possibility of such mistake. The user does not need to see or check the time, it automatically gets logged in.

• Less error: There is no scope of human error here.

• Profit to company: If it’s accurate and correct the company will definitely gain from it.

As everything has a good and bad side this too has its disadvantages, such as:

• Extra cost to company: Biometric software and machine cost a lot more, so installing such software need a good investment money wise.

• Extra management: Remember when every employee is logging his own timing when he comes or leaves; there is no extra management here. But, if you are putting a machine there has to be taken some care of it.

Biometrics time and management software is really helpful when creating payrolls for employees. Once a definite timing has been registered you don’t need to think twice before creating the employees pay.

Many homes are also using such kind of software to have a safe and secure home. Biometric software is really helpful when you need security in your home as well as in office. There are many companies all over the world providing such biometric time and attendance software. You just need to keep an eye on the technologies and websites that are providing you these.

Posted in general | Comments Off on Advantages and Disadvantages of Biometric Time and Attendance Software

How to Repair DBF Files by Using DBF Recovery Software

As a computer user you must have heard about a DBF file or some of you have used it. DBF is a database file format used by various database software programs, such as: Visual FoxPro, Clipper, dbFast, CodeBase, MultiBase, dbXL, Arago and similar database programs. A database file is a collection of data organized in a tabular form. A DBF file can be easily opened, edited and saved by any of these database programs therefore, this file format is very popular among computer users.

The most common use of a database file is to store a large amount of data and information. The file is widely used in almost every sector, such as: corporate and educational sectors to store the data and information. It has become an essential file format for an individual and an organization.

Where this file format is very useful for users on the other hand, it may create some serious problems as well. Sometimes a DBF file may become inaccessible or invalid due to corruption. DBF is not immune to corruption; in fact, this file format is prone to corruption due to its large size and complex file structure. It might be easily corrupted due to various reasons, such as: virus attacks, malfunction in database application, hard disk drive failure, software collision, unexpected cancellation of DBF, human errors and many more. These are some common reasons which can play an important role in database file corruption.

While opening a corrupt DBF file you may receive some error messages something like these:

  • “File .dbf does not exist”.
  • “The fields in table did not match the entries in the database”.
  • “Access to table disabled due to previous error”.
  • “Database file appears corrupt: Page is of wrong type.
  • “Corrupt table”/ “index header”.
  • “Filename .dbf has become corrupted”.

These are some common errors which frequently take place at the time of corruption. For example: you are working on your DBF file, everything is fine. But all of a sudden your database application (Visual FoxPro or other) starts hanging. You have no other option other than restarting the system. But when you restart your system and open the same DBF file, in which you were working earlier, it does not open or you get an error message saying the file is corrupted or damaged. This must be very frustrating situation for any user since all the hard work will go into the vain. All the data and information stored in the file might be lost forever. You have to re-create the file, which might not be possible in some cases.

In such critical state a BKF file will definitely help you. If you have backed up the database file (which is now corrupted), then you can easily restore it from the BKF file. But sometimes the BKF file may not be available or corrupted or invalid. In this situation you can use third-party DBF recovery software. This is one of the most efficient and effective solutions to fix corrupt DBF files. The DBF recovery software is designed to repair an extremely corrupted DBF file and to restore maximum data from it. It is highly capable to resolve or fix all the errors from corrupted DBF files. The software supports all popular database applications, such as: dBase III, dBase IV, dBase V, Visual FoxPro, Clipper, dBFast, CodeBase, MultiBase, dBXL and Arago. The best feature of the software is its self-describing user interface. It requires no technical knowledge or skills to use this software. Any tech savvy and a novice user can easily and comfortably use this software to repair corrupted DBF files. The DBF Recovery software is available with free demo version. Users can download the demo version before buying the full software. This helps users to examine the features and performance.

Posted in general | Comments Off on How to Repair DBF Files by Using DBF Recovery Software

Microsoft Access and Medical Private Practice

For physicians medical office software installation could be nerve-wracking, not because they want to avoid electronic medical records, but because the majority of the software packages are too complicated and very expensive for them.

The good news is, you can make your medical office software system uncomplicated and relatively easily maintained with one of the popular database software packages being used today, the Microsoft Access.

Microsoft Access is a relational database system developed by Microsoft. Microsoft Access is one of the easiest and most flexible database management solutions for the medical office and provides data validation and user-friendly features on data entry screens. It has been the dominant lightweight database system used for the last decade and has continued to grow with additional features. Access is a productive and very customizable solution for small medical practices and comes with MS Office (or standalone). However the next step up in a medical environment would be MS SQL Server but small medical offices usually only has need of a lightweight application and the added functionality with MS SQL Server, comes with a heavy price.

With this relational database system you can be up and running in one hour, which means that it is not necessary for your practice to spend lot of money to purchase, configure, update and maintain an SQL Server solution. Microsoft Access includes without any additional costs, points of integration with popular software packages including: Microsoft Word, Excel & Outlook and provides a free runtime version.

MS Access network setup is very easy. A medical office with 2-8 users is up and running within ten minutes, while installation and application maintenance is extremely simple. Virtually any user with a basic knowledge of Microsoft Access can handle all maintenance procedures without the assistance of IT personnel.

Keep also in mind that SQL Server is the flagship database system from Microsoft and it is suitable for use in environments with up to thousands of users. Microsoft Access can handle 2- 8 users and it is limited to 2 GB data storage.

We are convinced that the best way for private medical offices around the world to enter the world of electronic medical records is to purchase a professionally designed but inexpensive and affordable Microsoft Access based software solution.

Posted in general | Comments Off on Microsoft Access and Medical Private Practice

Choosing the Right SDLC For Your Project

Choosing the right SDLC (Software Development Lifecycle) methodology for your project is as important to the success of the project as the implementation of any project management best practices. Choose the wrong software methodology and you will add time to the development cycle. Adding extra time to the development cycle will increase your budget and very likely prevent you from delivering the project on time.

Choosing the wrong methodology can also hamper your effective management of the project and may also interfere with the delivery of some of the project’s goals and objectives. Software development methodologies are another tool in the development shop’s tool inventory, much like your project management best practices are tools in your project manager’s tool kit. You wouldn’t choose a chainsaw to finish the edges on your kitchen cabinet doors because you know you wouldn’t get the results you want. Choose your software methodology carefully to avoid spoiling your project results.

I realize that not every project manager can choose the software methodology they will use on every project. Your organization may have invested heavily in the software methodology and supporting tools used to develop their software. There’s not much you can do in this case. Your organization won’t look favorably on a request to cast aside a methodology and tools they’ve spent thousands of dollars on because you recommend a different methodology for your project. We’ll give you some tips on how to tailor some of the methodologies to better fit with your project requirements later in this article. In the meantime, before your organization invests in software development methodologies you, or your PMO, ought to be consulted so that at least a majority of projects are benefited from a good fit.

This article won’t cover every SDLC out there but we will attempt to cover the most popular ones.

Scrum

Scrum is a name rather than an acronym (which is why I haven’t capitalized the letters), although some users have created acronyms, and is commonly used together with agile software development. Scrum is typically chosen because of its iterative nature and its ability to deliver working software quickly. It is chosen to develop new products for those reasons. There is typically no role for a project manager in this methodology, the 3 key roles are: the scrum master (replacing the project manager), the product owner, and the team who design and build the system. There is only one role that you would be asked to play if your organization is committed to using this methodology, scrum master. If you should determine that this would actually be the best methodology for your project, you’ll have to re-examine your role as project manager. You can either identify a suitable scrum master and return to the bench, or fill the role of scrum master.

Scrum suits software development projects where its important for the project to deliver working software quickly. Scrum is an iterative methodology and uses cycles called sprints, to build a working system. Requirements are captured in a “backlog” and a set of requirements is chosen with the help of the product manager. Requirements are chosen based on 2 criteria: the requirement takes priority over others left in the backlog and the set of requirements chosen will build a functioning system.

During the sprint, which can last from 2 to 4 weeks maximum, no changes can be made to the requirements in the sprint. This is one of the reasons that a project manager isn’t necessary for this methodology. There is no need for requirements management because no changes are allowed to the requirements under development. All changes must occur in the requirements set in the backlog.

Scrum will be suitable for software development projects where the product is a new software product. By new I mean that it is new to the organization undertaking the project, not in general. The methodology was developed to address a need for a method to build software when its necessary to learn on the fly, not all requirements are known to the organization and the focus is on delivering a working prototype quickly to demonstrate capabilities. You need to be careful when choosing requirements to deliver in each sprint to ensure that the set developed builds a software system that is capable of demonstrating the feature set supporting the requirements included.

You also need to ensure that these requirements are well known and understood as no changes are allowed once the sprint starts. This means that any changes to the requirements must come through a new set of requirements in the backlog making changes to these requirements very expensive.

This methodology divides stakeholders into 2 groups: pigs and chickens. The inventors of this methodology chose this analogy based on the story of the pig and the chicken – it goes something like this. A pig and a chicken were walking down the road one morning and happened to notice some poor children who looked like they hadn’t eaten for days. The compassionate chicken said to the pig: “Why don’t we make those children a breakfast of ham and eggs?” The pig said: “I’m not happy with your suggestion. You’re just involved in making the breakfast, I’m totally committed!” The point to this is the product owner, scrum master, and team are all in the “pig” group. All others are in the “chicken” group. You will be in the “chicken” group if you choose the Scrum methodology as a project manager.

Waterfall

Waterfall methodology calls for each phase of the development cycle to be repeated once only. Requirements will be gathered and translated into functional specifications once, functional specifications will be translated to design once, designs will be built into software components once and the components will be tested once. The advantage of this methodology is its focus. You can concentrate the effort of all your analysts on producing functional specifications during one period rather than have the effort dispersed throughout the entire project. Focusing your resources in this way also reduces the window during which resources will be required. Programmers will not be engaged until all the functional specifications have been written and approved.

The disadvantage of this approach is its inability to teach the project team anything during the project. A key difference between the waterfall approach and an iterative methodology, such as Scrum or RUP, is the opportunity to learn lessons from the current iteration which will improve the team’s effectiveness with the next iteration. The waterfall methodology is an ideal methodology to use when the project team has built software systems very similar to the one your project is to deliver and has nothing to learn from development that would improve their performance. A good example of a project which would benefit from the waterfall methodology is a project to add functionality to a system the project team built in the not too distant past. Another example of an environment that is well suited to the waterfall methodology is a program to maintain a software system where a project is scheduled for specific periods to enhance the system. For example, an order and configuration software system which is enhanced every 4 months.

The waterfall methodology does not lend itself particularly well to projects where the requirements are not clearly understood at the outset. Iterative approaches allow the product owners or user community to examine the result of building a sub-set of requirements. Exercising the sub-set of requirements in the iteration’s build may cause the product owners or user community to re-examine those requirements or requirements to be built. You won’t have that opportunity with the waterfall method so you need to be certain of your requirements before you begin the build phase. Interpreting requirements into functionality is not the only aspect of development that can benefit from an iterative approach. Designing the system and building it can also benefit from doing these activities iteratively. You should use the waterfall method when your team is familiar with the system being developed and the tools used to develop it. You should avoid using it when developing a system for the first time or using a completely new set of tools to develop the system.

RUP

The Rational Unified Process, or RUP, combines an iterative approach with use cases to govern system development. RUP is a methodology supported by IBM and IBM provides tools (e.g. Rational Rose) that support the methodology. RUP divides the project into 4 phases:

1. Inception phase – produces requirements, business case, and high level use cases

2.Elaboration phase – produces refined use cases, architecture, a refined risk list, a refined business case, and a project plan

3. Construction phase – produces the system

4. Transition phase – transitions the system from development to production

RUP also defines 9 disciplines: 6 engineering disciplines, and 3 supporting disciplines: Configuration and Change Management, Project Management, and environment so is intended to work hand in hand with project management best practices.

Iteration is not limited to a specific project phase – it may even be used to govern the inception phase, but is most applicable to the construction phase. The project manager is responsible for an overall project plan which defines the deliverables for each phase, and a detailed iteration plan which manages the deliverables and tasks belonging to each phase. The purpose of the iterations is to better identify risks and mitigate them.

RUP is essentially a cross between Scrum and waterfall in that it only applies an iterative approach to project phases where the most benefit can be derived from it. RUP also emphasizes the architecture of the system being built. The strengths of RUP are its adaptability to different types of projects. You could simulate some of the aspects of a Scrum method by making all 4 phases iterative, or you could simulate the waterfall method by choosing to avoid iterations altogether. RUP will be especially useful to you when you have some familiarity with the technology but need the help of Use Cases to help clarify your requirements. Use Cases can be combined with storyboarding when you are developing a software system with a user interface to simulate the interaction between the user and the system. Avoid using RUP where your team is very familiar with the technology and the system being developed and your product owners and users don’t need use cases to help clarify their requirements.

RUP is one of those methodologies that your organization is very likely to have invested heavily in. If that’s your situation, you probably don’t have the authority to select another methodology but you can tailor RUP to suit your project. Use iterations to eliminate risks and unknowns that stem from your team’s unfamiliarity with the technology or the system, or eliminate iterations where you would otherwise use the waterfall method.

JAD

Joint Application Development, or JAD, is another methodology developed by IBM. It’s main focus is on the capture and interpretation of requirements but can be used to manage that phase in other methodologies such as waterfall. JAD gathers participants in a room to articulate and clarify requirements for the system. The project manager is required for the workshop to provide background information on the project’s goals, objectives, and system requirements. The workshop also requires a facilitator, a scribe to capture requirements, participants who contribute requirements, and members of the development team whose purpose is to observe.

JAD can be used to quickly clarify and refine requirements because all the players are gathered in one room. Your developers can avert misunderstandings or ambiguities in requirements by questioning the participants. This method can be used with just about any software methodology. Avoid using it where the organization’s needs are not clearly understood or on large, complex projects.

RAD

RAD is an acronym for Rapid Application Development uses an iterative approach and prototyping to speed application development. Prototyping begins by building the data models and business process models that will define the software application. The prototypes are used to verify and refine the business and data models in an iterative cycle until a data model and software design are refined enough to begin construction.

The purpose of RAD is to enable development teams to create and deploy software systems in a relatively short period of time. It does this in part by replacing the traditional methods of requirements gathering, analysis, and design with prototyping and modeling, the prototyping and modeling allow the team to prove the application components faster than traditional methods such as waterfall. The advantage of this method is it facilitates rapid development by eliminating design overhead. It’s disadvantage is that in eliminating design overhead it also eliminates much of the safety net which prevents requirements from being improperly interpreted or missed altogether.

RAD is suitable for projects where the requirements are fairly well known in advance and the data is either an industry or business standard, or already in existence in the organization. It is also suitable for a small development team, or a project where the system can be broken down into individual applications that require small teams. RAD is not suitable for large, complex projects or projects where the requirements are not well understood.

LSD

Lean Software Development, or LSD, applies the principles of waste reduction from the manufacturing world to the business of developing software. The goal of LSD is to produce software in 1/3 the time, on 1/3 the budget, and with 1/3 the defects of comparable methods. Lean does this by applying 7 principles to the endeavor of software development:

1. Eliminate waste

2. Amplify Learning (both technical and business)

3. Decide on requirements as late as possible

4. Deliver as fast as possible

5. Empower the team

6. Build integrity

7. See the whole

Although Lean Manufacturing has been around for some time, its application to the process of developing software is relatively new so I wouldn’t call it a mature process.

LSD would be a suitable method to use where you have a subject matter expert in the method who has some practical experience in applying lean methods to a software development project. “Amplified” learning implies that your development team has a depth of knowledge in the software tools provided, and also a breadth of knowledge that includes an understanding of the business needs of the client. LSD would be suitable for a project where the development team has these attributes.

LSD depends on a quick turnaround and the late finalization of requirements to eliminate the majority of change requests, so will not be suitable for a project where a delayed finalization of requirements will have a poor chance of eliminating change requests, or the size and complexity of the system being developed would prevent a quick turnaround.

Extreme Programming (XP)

Extreme programming places emphasis on an ability to accommodate changes to requirements throughout the development cycle and testing so that the code produced is of a high degree of quality and has a low failure rate in the field. XP requires the developers to write concise, clear, and simple code to solve problems. This code is then thoroughly tested by unit tests to ensure that the code works exactly as the programmer intends and acceptance tests to ensure that the code meets the customer’s needs. These tests are accumulated so that all new code passes through them and the chances for a failure in the field are reduced.

XP requires the development team to listen carefully to the needs and requirements of the customer. Ambiguities will be clarified by asking questions and providing feedback to the customer which clarifies the requirements. This ability implies a certain degree of familiarity with the customer’s business; the team will be less likely to understand the customer’s needs if they don’t understand their business.

The intent of XP is to enhance coding, testing, and listening to the point where there is less dependency on design. At some point it is expected that the system will become sufficiently complex so that it needs a design. The intent of the design is not to ensure that the coding will be tight, but that the various components will fit together and function smoothly.

XP would be a suitable software development method where the development team is knowledgeable about the customers business and have the tools to conduct the level of testing required for this method. Tools would include automated unit testing and reporting tools, issue capture and tracking tools, and multiple test platforms. Developers who are also business analysts and can translate a requirement directly to code are a necessity because design is more architectural than detail. This skill is also required as developers implement changes directly into the software.

XP won’t be suitable where the development team does not possess business analysis experience and where testing is done by a quality assurance team rather than by the development team. The method can work for large complex projects as well as simple smaller ones.

There is no law that states you must choose one or the other of these methodologies for your software project. The list I’ve given you here is not a totally comprehensive list and some methodologies don’t appear on it (e.g. Agile) so if you feel that there is some other methodology that will better suit your project, run with it. You should also look at combining some of the features of each of these methods to custom make a methodology for your project. For example, the desire to eliminate waste from the process of developing software is applicable to any method you choose and there is likely waste that could be eliminated in any development shop.

Be careful to choose a methodology that is a good fit for your team, stakeholders, and customer as well as your project. Bringing in a new development methodology that your team will struggle to learn at the same time they are trying to meet tight deadlines is not a good idea. On the other hand, if you have the latitude you may want to begin learning a new method with your project.

Posted in general | Comments Off on Choosing the Right SDLC For Your Project

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

The Importance of Educational Software in Educational Institutes

Internet has expanded its dimensions like anything. The incredible expansion of the web world along with its easy and affordability of integrated technology have come together to create a new learning methodology of Educational Software. Nowadays, the task of carrying out educational projects and disseminating education is not at all futuristic or alien. This have not only become an important part of the educational setup but also of the business world. The facility to link with the internet in a reasonably priced and competent manner was the basic reason for this tremendous growth of this. Nowadays, education software available in comprehensive package forms for colleges, schools, Universities and even home use.

With time, educational institutions have become more diverse and therefore they cannot risk being simple temples of education. There are vast varieties of activities in educational institutes like admissions, curriculum management, library management, placements, hostel management, finance management and a number of other requirements. It is in view of these burgeoning requirements of schools and higher educational institutions that Educational Software have become popular nowadays. This software can address all the requirements of an educational institute starting from student curriculum management to school bus tracking system to Biometric Attendance System to Student Information System to Library Automation Systems.

Education Software is nowadays constituents of a school’s identity as they are capable of delivering all the associated tasks. Present day software even provides the facility and access to parents to keep a bird’s view of their kid’s progress in the classroom. The Student Information System enables parents to monitor the curriculum of their children and receive feedbacks from the teachers. Intelligent Library Management System allows easy access to library records.

Another aspect of education software is their Bus Tracking System that ensures the safety of students. It is a path breaking integration into this software. Nowadays, they have become quite affordable integrating advanced GPS applications into the software. They are effective tools for the school management as well as the parents, who want to know whether their students or kids are safe while travelling from school to home and vice versa.

The curriculum management component of this is capable giving an interactive learning experience to students. Nowadays, most of the education software is capable of developing to the next level as and when students grow in their knowledge. Online tests and evaluations have become important tools used by such software in order to test the level of students. It can even take the form of a game in order to stimulate the mind of children giving them real demonstrations of subject matter. Educational Software can now be found for students of all ages and for all subjects.

Posted in general | Comments Off on The Importance of Educational Software in Educational Institutes