Different Types of Computer Repair Services

Our dependency towards technology is increasing day by day. Even a minor problem in the operating system disrupts our life and hampers our work. With the development of new technology, there also comes many technical problems such as virus infections, spyware attacks on the operating system, networks issues, and hardware failures. Therefore, fast and efficient troubleshooters are always needed to fix all your technical problems without disabling your work.

With the indispensable use of computers in our daily lives, we can not imagine encountering an issue that will leave us without our personal computers thus; We seek to have the computer service immediately. But due to the busyness of life, it is not possible for us to go to a computer service centers every time and get the system repaired leaving you days without a computer. Seeing today's need, there are many efficient and fast troubleshooters available online that will solve your problem in a fraction of time. Many of us do not understand need for professional computer repair services and try to solve the system related problem by themselves. Before going to any of the computer repair service sites, it is very important to be aware of the various types of services that are offered by the computer repair service centers:

1. IT services like network installation and configuration (LAN / WAN setup).

2. Virus & spyware removal. Installation of anti-virus software for a proactive approach to external attacks.

3. Hardware repair: Laptop / Mac / PC, printer, scanner, motherboard; CD / DVD ROM installation etc.

4. Problems related to Website development and presentation, graphic designing

5. Firewall and email security setup.

6. Windows OS installation and troubleshooting

7. Data backup and recovery

8. Tutorials to employees for solving small problems in-house

So, These are some of the services offered by the service providers. Before hiring any of the online computer repair services, it is very important to check the various types of services offered by them. So that you do not need to switch to different computer repair services sites for different services. It is also very important to check that there is a team of expert technicians for solving computer related problems individually, as this will help in solving the problem fast and efficiently. It is better to switch to such online computer repair services that you avail with the guarantee of fixing the problem fast else money back. As such, promises will pressurize the technicians to work efficiently and fix the problem quickly.

Posted in general | Comments Off on Different Types of Computer Repair Services

How to Change the MPI Node Address For a Siemens S7-300 PLC

I have seven Siemens S7-300 PLCs connected together using the MPI (Multi Point Interface) interface. The Siemens MPI protocol is used by Siemens PLCs to communicate with external devices. I want to rename each of the seven PLCs. Here are the steps to accomplish that task.

First, connect your MPI cable to the first PLC. I will be connecting my laptop to each PLC individually. Power up the PLC and open Simatic Manager. The "New Project" Wizard window will open. Just click Cancel to close the window. Now click the Accessible Nodes icon on the toolbar. A window will open showing the identification of the PLC you are connected to. My window is showing MPI = 2 (directly). Make a note of this address and close the window.

Next we need to download a hardware configuration to the PLC. This is where we will rename the PLC node address. There are probably a couple of different ways to do this – following is how I accomplish this. All seven of my PLCs are the same model; Therefore, I am using the same hardware configuration. For the obvious reasons, I want to give each a different MPI node address. I have a project file that contains all seven of my PLC programs and one hardware configuration file. I open the one hardware configuration file, and then double click Hardware in the right hand window. This will open the HW Configuration window. In this window you should see your PLC with its MPI address given.

Remember when we clicked the Accessible Nodes icon and saw MPI = 2 (directly)? My Hardware Configuration Window is showing a MPI address of 7. Place your mouse cursor on the 7 and double click. Your CPU Properties window will open. It should open to the General tab. Look down and you will see Interface Type MPI with an address of 7. Click Properties and the MPI interface Properties window will open. Using the pull down menu, choose your MPI node address and make sure the MPI (1) 187.5kbps is highlighted and click OK. You are now back on the CPU Properties window where you will see your address has changed. Click OK and you will go back to the Hard Ware window where you can verify your MPI node address has changed.

You will now click the Save and Compile icon and then click the download icon. The Select Target Module window will open. Click OK and the Select Node Address window will open. Here you will see the MPI node address you assigned earlier. You will need to click the View button right below this. You will see the current node address appear, this should be the same as what you saw earlier when you clicked the Accessible Nodes icon. Simply click on this number and you will see it appear in the MPI address slot under the Enter connection to target station. Click OK and the Download to Module window will open. Click OK and the Stop Target Modules window will open. Click OK and the "Do you want to start the module?" Window will open. Click Yes.

Now go back to the SIMATIC Manager window and click the accessible nodes icon. You will see your new MPI node address. You can see this same article with pictures at http://www.morerobototics.com .

Posted in general | Comments Off on How to Change the MPI Node Address For a Siemens S7-300 PLC

The Leading Gaming PC Cases Are Essential To Help Protect and Power Your Extreme Gaming Hardware

Gaming PC Cases come in a variety of shapes and sizes. From rack mount to ATX tower casing, you can find one that best suits your gaming needs. Many games are played by as many 15-24 users and such games require the power of hardware to control both the graphics and many millions of instructions to the CPU with great speed. Custom Gaming PCs are the current rave with game lovers who strive for a better playing experience, adding more hardware.

With a large variety of casing, it is confusing to choose the right one. A good PC Case for gaming is one that has ample space to add more fans and USB ports. Heating is the main problem that slows down the PC and in some instances can damage it. Looks also matter a lot, an attractive and next-gen look, makes for a better playing experience.

All gaming PC cases come with microphones and headphone sockets, while the more advanced ones have fan controllers. New game players can do with two fans while some want to get additional fans to keep the PC from heating up. More advanced users utilize much of CPU power, and need more cooling.

When you are ready to buy a case, first look at the price options, compare various makes and models and see where you can save money and get the same functionality. The most accommodating case is considered the best. It will allow for more fans, and offers ample space for advanced graphic cards. Check to see, if the case can allow more than 4 fans and has at least two USB ports.

Some cases come with 4 USB ports and have space for up to six fans. If you are an advanced level player, you may want to consider one that has a fan speed controller, so you can monitor the cooling easily. Further up the ladder, there are cases that come with space for as many as 12 hard drives. Such a case, can take any kind of mother board you want to use.

The ATX are more popular these days and are like the industry standard. ATX form-factor allows for better air passage so all components can stay cool. It uses less cable, generates less heat and is more affordable. The expansion slots are easily accessible making it easy for users to add more graphic cards.

Looks wise, a clear panel looks attractive and spices up the computer using LEDs. There are also cases with bright graphics, and a modish look to add to the adventure. It all depends on your game choice, if you like a good thrill considering Gaming PC Cases that will add excitement to game time.

Posted in general | Comments Off on The Leading Gaming PC Cases Are Essential To Help Protect and Power Your Extreme Gaming Hardware

Futon Frame Maintenance and Common Replacement Parts and Hardware

A little preventative maintenance of your futon frame can greatly increase how long it lasts. We recommend checking the bolts on your futon frame every month or two, depending on how often it's used. If they are loose, gently tighten them, but be careful not to over tighten them. If you have a wooden frame, you can rub a bar of Ivory soap in the arm tracks every now and then, to keep things operating smoothly.

Most of the damage that we see is from forcing the frame to operate, when it's stuck. If you are converting your frame from a bed to a sofa, or from a sofa to a bed, and it does not easily convert, stop what you are doing, and remove the mattress, and carefully examine why it's not moving easily. Usually if you try to convert the frame and you pull on one side more than the other, something will jam, and if forced, you may break something.

Normally a guest will try to make their bed in the morning, and not knowing how to do it, they may break your frame. We suggest telling your guests to leave the futon as a bed, and you'll take care of changing it from a bed to a sofa for them.

Some parts wear out, and some of the plastic parts can dry out over the years. If the bolts are not tightened, a part can move around in a way that it's not recommended to, and that can cause it to break. People ask us why they do not make some of the parts in futon frames out of metal so they're never break. The reason is, if they were metal, and something jammed up, and was forced, the seat, or back, or an arm would crack, and that would be a more costly repair.

Here's a list of some of the more common futon frame hardware and parts. This is by no means a complete listing of all the parts, but it includes most of the common parts. Some items are called more than one name, so we list them twice. Futon store that has been around a long time, might even have obsoleste parts that you might need.

If you need a part that you can not find anywhere, consult a good futon store who's willing to help you, and give them a description and a couple of pictures showing what you need and see if they are willing to help you. They may need to know the name of the manufacturer of the frame because there are many frames that look the same, but the size of the bolts or seat decks and other items will all be slightly different.

Futon Bolts
Standard Futon Hinges
Click Click Hinges
Triple Click Hinges
Futon Mattress Storage Bags
Oblong Rollers
Carriage Blocks
Round Futon Rollers
Double Futon Rollers
Nylon Roller Inserts
Futon Barrel Nuts, Nuts, and Cross Dowels
Larger Futon Barrel Nuts
Futon Seat Stoppers
Futon Storage Bags
Allen Wrenches
Larger Allen Wrenches
Plastic Leg Caps
1/2 "Futon Hardware Sets
5/8 "Futon Hardware Sets
Angle Support Brackets
Decorative Bolt Covers or Plugs
Clevis Pins and Assemblies
Various Plastic Rollers, Glides and Carriage Blocks
Stretcher Support Rails
Futon Seat Decks
Futon Back Decks
Futon Arms
Cotter Pins
Washers and Clips
Futon Slats and Supports

Posted in general | Comments Off on Futon Frame Maintenance and Common Replacement Parts and Hardware

Why Do We Need Software Engineering?

To understand the necessity for software engineering, we must pause briefly to look back at the recent history of computing. This history will help us to understand the problems that started to become obvious in the late sixties and early seventies, and the solutions that have led to the creation of the field of software engineering. These problems were referred to by some as “The software Crisis,” so named for the symptoms of the problem. The situation might also been called “The Complexity Barrier,” so named for the primary cause of the problems. Some refer to the software crisis in the past tense. The crisis is far from over, but thanks to the development of many new techniques that are now included under the title of software engineering, we have made and are continuing to make progress.

In the early days of computing the primary concern was with building or acquiring the hardware. Software was almost expected to take care of itself. The consensus held that “hardware” is “hard” to change, while “software” is “soft,” or easy to change. According, most people in the industry carefully planned hardware development but gave considerably less forethought to the software. If the software didn’t work, they believed, it would be easy enough to change it until it did work. In that case, why make the effort to plan?

The cost of software amounted to such a small fraction of the cost of the hardware that no one considered it very important to manage its development. Everyone, however, saw the importance of producing programs that were efficient and ran fast because this saved time on the expensive hardware. People time was assumed to save machine time. Making the people process efficient received little priority.

This approach proved satisfactory in the early days of computing, when the software was simple. However, as computing matured, programs became more complex and projects grew larger whereas programs had since been routinely specified, written, operated, and maintained all by the same person, programs began to be developed by teams of programmers to meet someone else’s expectations.

Individual effort gave way to team effort. Communication and coordination which once went on within the head of one person had to occur between the heads of many persons, making the whole process very much more complicated. As a result, communication, management, planning and documentation became critical.

Consider this analogy: a carpenter might work alone to build a simple house for himself or herself without more than a general concept of a plan. He or she could work things out or make adjustments as the work progressed. That’s how early programs were written. But if the home is more elaborate, or if it is built for someone else, the carpenter has to plan more carefully how the house is to be built. Plans need to be reviewed with the future owner before construction starts. And if the house is to be built by many carpenters, the whole project certainly has to be planned before work starts so that as one carpenter builds one part of the house, another is not building the other side of a different house. Scheduling becomes a key element so that cement contractors pour the basement walls before the carpenters start the framing. As the house becomes more complex and more people’s work has to be coordinated, blueprints and management plans are required.

As programs became more complex, the early methods used to make blueprints (flowcharts) were no longer satisfactory to represent this greater complexity. And thus it became difficult for one person who needed a program written to convey to another person, the programmer, just what was wanted, or for programmers to convey to each other what they were doing. In fact, without better methods of representation it became difficult for even one programmer to keep track of what he or she is doing.

The times required to write programs and their costs began to exceed to all estimates. It was not unusual for systems to cost more than twice what had been estimated and to take weeks, months or years longer than expected to complete. The systems turned over to the client frequently did not work correctly because the money or time had run out before the programs could be made to work as originally intended. Or the program was so complex that every attempt to fix a problem produced more problems than it fixed. As clients finally saw what they were getting, they often changed their minds about what they wanted. At least one very large military software systems project costing several hundred million dollars was abandoned because it could never be made to work properly.

The quality of programs also became a big concern. As computers and their programs were used for more vital tasks, like monitoring life support equipment, program quality took on new meaning. Since we had increased our dependency on computers and in many cases could no longer get along without them, we discovered how important it is that they work correctly.

Making a change within a complex program turned out to be very expensive. Often even to get the program to do something slightly different was so hard that it was easier to throw out the old program and start over. This, of course, was costly. Part of the evolution in the software engineering approach was learning to develop systems that are built well enough the first time so that simple changes can be made easily.

At the same time, hardware was growing ever less expensive. Tubes were replaced by transistors and transistors were replaced by integrated circuits until micro computers costing less than three thousand dollars have become several million dollars. As an indication of how fast change was occurring, the cost of a given amount of computing decreases by one half every two years. Given this realignment, the times and costs to develop the software were no longer so small, compared to the hardware, that they could be ignored.

As the cost of hardware plummeted, software continued to be written by humans, whose wages were rising. The savings from productivity improvements in software development from the use of assemblers, compilers, and data base management systems did not proceed as rapidly as the savings in hardware costs. Indeed, today software costs not only can no longer be ignored, they have become larger than the hardware costs. Some current developments, such as nonprocedural (fourth generation) languages and the use of artificial intelligence (fifth generation), show promise of increasing software development productivity, but we are only beginning to see their potential.

Another problem was that in the past programs were often before it was fully understood what the program needed to do. Once the program had been written, the client began to express dissatisfaction. And if the client is dissatisfied, ultimately the producer, too, was unhappy. As time went by software developers learned to lay out with paper and pencil exactly what they intended to do before starting. Then they could review the plans with the client to see if they met the client’s expectations. It is simpler and less expensive to make changes to this paper-and-pencil version than to make them after the system has been built. Using good planning makes it less likely that changes will have to be made once the program is finished.

Unfortunately, until several years ago no good method of representation existed to describe satisfactorily systems as complex as those that are being developed today. The only good representation of what the product will look like was the finished product itself. Developers could not show clients what they were planning. And clients could not see whether what the software was what they wanted until it was finally built. Then it was too expensive to change.

Again, consider the analogy of building construction. An architect can draw a floor plan. The client can usually gain some understanding of what the architect has planned and give feed back as to whether it is appropriate. Floor plans are reasonably easy for the layperson to understand because most people are familiar with the drawings representing geometrical objects. The architect and the client share common concepts about space and geometry. But the software engineer must represent for the client a system involving logic and information processing. Since they do not already have a language of common concepts, the software engineer must teach a new language to the client before they can communicate.

Moreover, it is important that this language be simple so it can be learned quickly.

Posted in general | Comments Off on Why Do We Need Software Engineering?

Website Design – Hardware and Software Tools You May Need

Before you get started with your new website or editing your current site, you need to consider which hardware and software tools you may need to support your efforts.

When it comes to hardware needed this can be very simple or reasonably complex depending on your particular needs. Of course, if you plan to create a new website (or even view your new website later) you need a computer. Simple enough, right? Not necessarily. We prefer to work with Apple Macintosh (OSX Leopard on MacBook Pro) as we do a lot of intensive graphics work and have previously invested in Adobe Creative Suite software (Photoshop, InDesign, Flash, Dreamweaver, etc.). It is just as easy to create your new website using your Windows PC but we would suggest you stay away from using Windows Vista (any version) and migrate to Windows 7 or stick with Windows XP. These operating systems are just much more stable and reliable.

Another consideration for hardware should be some sort of backup hard drive or removable USB memory stick(s). It is important that you back up all of your website data to a removable drive in the event your computer crashes, is broken or is stolen. When you create website files, most of your data will be stored on the website hosting servers but, in many cases, you will have many other “builder files” that usually never make it to the hosting servers. If you lose this data you will be forced to start from scratch in many cases. Another piece of hardware that many forget about is a HD Video Camcorder. If you plan to include video on your site, you should be investing in something half decent; you can normally pick up a good video camera that also captures “still photos” for under $500.00.

When it comes to software needed, this can be somewhat more complicated, again depending on what your website design goals are. At the very least, you will need some sort of text editing software, FTP (file transfer software), graphics creation software and then a variety of other tools as you progress.

Here are some of the most common subjects you should consider when planning the design of your website product.

COMPUTER

Do you currently have a computer that can process large files (i.e. – video files) quickly and efficiently?

WEBSITE SERVER

Are you planning to host your own website portal? If so, do you know what type of hardware and server software you will need?

BACKUP HARD DRIVE or USB STICK

Do you currently have some sort of backup hard drive equipment or plan?

VIDEO CAMERA

Will you be creating custom videos for your website and, if so, do you have a HD video camera ready to go?

MOBILE WEB DEVICES

Are you planning to make your website “mobile web friendly”? If so, do you have an iPhone and an iPad? Android phone? Blackberry device? These will be needed for testing purposes!

WEBSITE CREATION SOFTWARE

Do you have any website creation software (i.e. – Adobe Dreamweaver or Microsoft Front Page) installed, licensed and ready to use?

GRAPHICS EDITING SOFTWARE

Are you planning to create your own website graphics or edit pictures? Do you have the necessary software (i.e. – Adobe Photoshop or Photo Studio)?

DATABASES

Are you planning on creating a database for your website and, if so, do you know which software to use for this purpose?

Posted in general | Comments Off on Website Design – Hardware and Software Tools You May Need

The Advantages of Having Personal Productivity Software

Personal productivity software is an application that no business should be without. This is because of the simple fact that this piece of software makes a great contribution when it comes to ensuring productivity in the workplace. But if you are not too convinced about the importance of purchasing personal productivity software just yet, well, this is actually normal. A lot of business men do become wary when presented with the notion of purchasing such software because computer software is a bit pricey in the market right now. However, when presented with the many benefits businesses enjoy with these software applications, the activity of convincing businessmen becomes very, very easy to do.

So, why exactly do you need personal productivity software in running your business? First of all, this piece of software can give any type and size business the professional touch it needs. The software comes with applications and programs that make it very easy for you to produce professional looking letterheads, marketing reports, brochures, mailing campaigns, and the like. Even the simple act of developing professional looking paychecks is easily done with the use of such software as well. And this is just one of the minor benefits that come with such software!

When you get the basic package, you actually get a word processor, a spreadsheet application, presentation software, and the like. For a more cost-efficient option, you could consider getting one of those suites that contain a number of these tools. This way, you are sure to get more value for your money. Some examples of these suites include Microsoft Office, Sun Staroffice 8, Microsoft Works, or Corel WordPerfect Office. An interesting fact about Microsoft Works is that it actually comes free with personal computers. Aside from these suites, you can also choose to get supplementary software packages that can make your whole life easier.

One of the popular software packages includes QuickBooks. This choice is popular because it is known to be very efficient in handling and managing inventory and business finances, such as payroll and benefits packages. Now, with all these abilities, you have to be sure to allot a hefty budget for your suite of tool and the additional applications and programs you would be getting. The typical price for suites and the individual applications range from a hundred to five hundred dollars. So, if your PC is meant for more than just doing the regular email and the basics on word processing, then you should consider this option thoroughly.

You may also be worried about the hidden and recurring fees that might come with having personal productivity software installed in your system. Yes, they do come with long term costs, but these are just minimal when you compare them to the benefits you would come to enjoy with the software. An upgrade would occasionally be needed, especially after a few years or so with your own application suite. Plus, your business should be growing in a few years, right? Thus, it would make much sense to avail of this upgrade, to foster improvement for your company in the business setting. Do not worry too much about upgrade expenses because they would definitely be lower than that of the original purchase.

Posted in general | Comments Off on The Advantages of Having Personal Productivity Software

Computer Hardware Course – The Advantages of Taking It

Computer hardware courses are an excellent way to learn how to manage the inevitable computer failures that you will encounter as you find yourself hanging on your computer more and more everyday. While you do have the option of taking your computer to the service center it can cost you a lot of time and money. Your computer hardware course is invaluable for helping you understand the hardware requirements for your computer that will be enable you to jump to the rescue instead of trudging along to the repair shop.

It does not take an engineer or a technician to be successful in learning about computer hardware. If you are interested in engineering or technician positions however, a background in computer hardware can make you a far more valuable person in your field and can enhance your employability tremendously.

To troubleshoot your computer you can do very well with a simple computer hardware course. You can become your own specialist and forgo spending the money on an IT specialist.

The time invested in a computer hardware study program will pay off quickly when things go wrong. But, this is not the only reason taking a computer hardware course would be a good plan.

Not only will you be able to fix your computer, but you will have the knowledge to build a computer from scratch. The cost of computer parts is often far less expensive than buying a pre-made package. You will also be able to customize your computer so that it is perfectly designed for your needs.

By avoiding the cost of labor from the computer store you will have a far less expensive computer that is perfect for you. You will also no longer need to worry about taking your computer in for repairs as you will know just how to fix what goes wrong.

Computer knowledge is in high demand no matter what career you are involved in. With the information you learn in a computer hardware course you will be able to take on an IT position. Such positions are in high demand as a limited number of people have the knowledge to take on an IT role.

The time needed to take a computer hardware course is well worth the investment. Learning about software and programming can only make you even better with your computer goals. If you are limited in time, not to worry. Many courses are available online or on CD for you to do at home.

Take some time to discover exactly what will be covered in your course. The computer technology field is huge, so you will need to focus. You will never be able to learn everything about computer hardware in a single course. It takes a lifetime of study to learn, and with technology constantly changing you will need to continuously work on keeping your knowledge up to date. A computer hardware course will bring you a chance to get ahead of the game and keep up with your own computer.

Louis Zhang, computerhardwarecute dot com

Posted in general | Comments Off on Computer Hardware Course – The Advantages of Taking It

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Benefits of an Android TV Box

The Android TV box is a useful piece of kit that connects to the TV via the HDMI port to offer most of the features of Android. This type of set up is very flexible and easily connects to most TVs with the right port and is a lot cheaper than a smart TV. Here are a few of the benefits of using the Android TV box:

Endless apps

One of the most appreciated benefits is the ability to use and install the endless apps that are now available on the Android operating system. By visiting the Google Play store using the internet connection, it is possible to install the latest apps related to not only multimedia content, but also audio editing applications, games, books, magazines, sending email, or signing into social media accounts, such as Facebook and Twitter.

TV support

By connecting the Android TV box to the TV at home via the internet; It is also possible to connect to other devices in the home, such as those that make use of technologies like Airplay, Miracast, DLNA, or others that function with Android. This makes it very flexible to share various types of multimedia with the TV. For instance, it is possible for an Android compatible tablet or smartphone to interact and control the TV while also giving the option to share files with a laptop or even watch a downloaded series or a movie on the large screen. Overall, this type of setup gives a simple gateway to get the internet on the TV.

Great price

The cost of upgrading a standard TV to benefit from all the possibilities of Android is relatively cheap compared to buying a smart TV. Plus, the combined standard TV and Android TV box can offer a lot more than a standard smart TV.

Regular updates

The Android operating system is updated on a regular basis, which means the latest version of a game, application, or system is always available. Plus, this is usually done automatically so there is no need to keep searching for updates when logged into the app store. This is significantly more convenient than a smart TV which can take a while to receive updates, especially when every brand of TV needs to have its own update created and released.

All in all, the Android TV Box makes it possible to enjoy the connectivity and versatility of Android on a standard TV set up.

Posted in general | Comments Off on Benefits of an Android TV Box